Motorola RDU2080d - RDX Series On-Site UHF 2 Watt 8 Channel Two Way Business Radio, User Manual

Page: 47 / 105

PROG
RAMM
ING
FEAT
URES
English
45
To program the desired bandwidth (HI = 25
kHz, LOW = 12.5 kHz), use the
/ buttons
until to select the value. Long press the PTT
button to exit and save or short press the PTT
button to move to the next programming
feature without saving.
Note: If the value of the bandwidth cannot be
changed, the display setting remains solid.
PROGRAMMING SCRAMBLE
L
The scramble feature makes your
transmissions sound garbled to anyone
listening without the same scramble code.
It does not guarantee confidentiality, but it adds
an extra layer of privacy. Scramble default
value is OFF.
Once you have entered ’Programming Mode’
and selected the channel in which you want to
enable Scramble (
L
), scroll up/down through
the programming options by short pressing the
PTT button, until your radio reaches the
‘Scramble Programming Mode’:
The current scramble setting will blink. You can
select the desired scramble value (0,1,2 or 3)
by pressing the
/ buttons. Long press the
PTT button to exit and save or short press the
PTT button to move to the next programming
feature without saving.
Note: The values available for scrambling are
dependent upon the values programmed via
the CPS. When the scramble setting is ‘0’ it
means it is disabled.