manualshive.com logo in svg

Motorola RDU2080d - RDX Series On-Site UHF 2 Watt 8 Channel Two Way Business Radio, User Manual

Share
Download
Motorola RDU2080d - RDX Series On-Site UHF 2 Watt 8 Channel Two Way Business Radio User Manual Download Page 39

GET

T

IN

G S

T

ART

E

D

English

                                                                                                                                                           37

HANDS-FREE USE/VOX

Motorola RDX™ radios can operate hands-free 
(VOX) when used with compatible VOX 
accessories. 

With Compatible VOX Accessories

The default factory setting for VOX sensitivity 
level is OFF (level ‘0’). Before using VOX, set 
the VOX level to a level different from ‘0’ via the 
CPS. Then, perform the following steps:

1.

Turn the radio OFF.

2.

Open accessory cover.

3.

Insert audio accessory’s plug firmly into 

accessory port.

4.

Turn the radio ON. Radio will beep and LED will 

blink double red. The display will show the 
VOX

 icon.

5.

Lower radio volume BEFORE placing 

accessory near ear.

6.

To transmit, speak into accessory microphone 

and to receive, stop talking.

7.

You can disable VOX operation by pressing the 

PTT button or removing the audio accessory.

Note:

To order accessories, call 1-800-422-4210, 
or contact your Motorola point of purchase.

Accessory 
Connector

VOX 
Accessory

  

Summary of Contents for RDU2080d - RDX Series On-Site UHF 2 Watt 8 Channel Two Way Business Radio










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands