Motorola Radius PM400 User Manual Download Page 26

Page: 26 / 76

English

TTIN

G S

TED

TRANSMIT AN LTR CALL

TRANSMIT A CONVENTIONAL
CALL

to select the appropriate LTR

channel/talkgroup.

Hold the microphone in a vertical position at
a distance of about 1 to 2 inches
(2.5 to 5 cm) from your mouth.

Press and hold the

PTT

button.

–or–

Press and release the

PTT

button and wait 3

seconds.
•

If access to the trunked system was
successful, the red LED indicator lights
steady.

•

If access to the trunked system was
unsuccessful, the red LED indicator
flashes, indicating that the system was
busy or out-of-range.

With the

PTT

button depressed, speak

clearly into the microphone

Release the

PTT

button to listen.

Turn your radio on.

select the desired channel.

Hold the microphone vertically 1 to 2 inches
(2.5 to 5 cm) from your mouth. Press the

PTT

button to talk.

•

The red LED indicator lights steady while
the call is being sent.

Release the

PTT

button to listen.

02_GetStarted.fm Page 24 Monday, August 2, 2004 2:58 PM

Summary of Contents for Radius PM400













































































Search results

Summary of Contents for Radius PM400

Reviews:

Related manuals for Radius PM400

Brands by name

Popular brands

Motorola Radius PM400, User Manual

Search results

Summary of Contents for Radius PM400

Reviews:

Related manuals for Radius PM400

Brands by name

Popular brands