1
2
Plug the wall power adapter into the appropriate Alternating Current (AC) outlet.
A successful power-up sequence is indicated by a single green blink on the charger indicator.
Refer to the
IMPRES Battery Charging Indicators on page 9
.
3
Insert a Motorola Solutions-approved battery, or a radio with a Motorola Solutions-approved
battery into the charger pocket.
a
Align the battery contacts with the charger contacts.
b
Press the battery into the pocket, ensuring complete contact.
Once the Motorola Solutions-approved battery is properly seated into the pocket, the charger
indicator illuminates, indicating the charger has recognized the presence of the battery.
4
To remove a radio or Motorola Solutions-approved battery from the charger, pull straight up until
the battery completely clears the charger housing.
1.2
IMPRES Battery Charging Indicators
Table 1: IMPRES Battery Charging Indicators
Status
LED Status
Comments
Charger Power On
Green for approx. 1
sec
Successful charger
power-up.
Rapid Charging
Steady red
Battery in rapid
charge mode.
Charged to 90 % or
more
Flashing green
Battery is charged to
90 % or greater ca-
pacity.
Charged to 95 % or
more
Steady green
Battery is charged to
95 % or greater ca-
pacity.
Calibration
Steady amber
Battery is in recon-
dition or calibration
mode.
Fault
Flashing red
Not chargeable; re-
move and re-insert ra-
dio or battery.
MN006348A01-AC
Chapter 1 : IMPRES Batteries and Chargers
9
