Motorola PMLN7632, Manual

Page: 8 / 16

6
IMPORTANT: When not in use, cover the external
PTT terminal with waterproof cap to
keep out dust and water.
Attaching Interface Module Connector To
The Radio
1. Turn the radio OFF .
2. Connect the Interface Module connector to the
radio.
3. Turn the radio ON , adjusting the audio volume to
an appropriate level.
Wearing Bone Conduction Ear Micro-
phone
1. Insert the ear microphone
into the ear canal and place
the cable behind the ear as
shown in the picture. The
Bone Conduction Ear
Microphone can be worn in
the right or left ear.
Note: Once the kit has been installed, the radio
microphone and the radio speaker will be
disabled. The user must use the Bone
Conduction Ear Microphone to transmit and
receive calls.
Performance
To minimize interference and optimize the Bone
Conduction Ear Microphone performance, make
sure the accessory cable does not coil around the
radio antenna during use.
DO NOT set the volume level too loud.
MN003507A01.book Page 6 Tuesday, November 22, 2016 2:24 PM