Motorola PM603 User Manual Download Page 24

Page: 24 / 68

Installation

1-15

5. Align the standoffs on the MVME160x board with the holes at the

edges of the PM603 or PM604 mezzanine, install the phillips-head
screws through the holes in the mezzanine and the spacers. Tighten
the screws.

6. Install the MVME160x assembly in its proper card slot. Ensure the

module is seated properly in the backplane connectors. Do not
damage or bend connector pins.

7. Replace the chassis or system cover(s) and connect the system to the

AC or DC power source. Turn the equipment power on.

Installation of RAM104 on PM603/PM604

The RAM104 DRAM mezzanine mounts on top of the PM603 or PM604
processor/memory mezzanine. To install a RAM104 mezzanine, refer to
Figure 1-4 and proceed as follows:

1. Attach an ESD strap to your wrist. Attach the other end of the ESD

strap to the chassis as a ground. The ESD strap must be secured to
your wrist and to ground throughout the procedure.

2. Perform an operating system shutdown. Turn the AC or DC power

off and remove the AC cord or DC power lines from the system.
Remove chassis or system cover(s) as necessary for access to the
VMEmodules.

Caution

Inserting or removing modules with power applied may
result in damage to module components.

Warning

Dangerous voltages, capable of causing death, are present
in this equipment. Use extreme caution when handling,
testing, and adjusting.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PM603





































































Search results

Summary of Contents for PM603

Reviews:

Related manuals for PM603

Brands by name

Popular brands

Motorola PM603, User Manual

Search results

Summary of Contents for PM603

Reviews:

Related manuals for PM603

Brands by name

Popular brands