Motorola PM1200, User Manual

Page: 54 / 56

GENERAL FEATURES
Selecting Transmit Power Level
Sending an Emergency Alarm
Cancelling an Emergency Alarm
SCANNING
Turning Scan On or Off
Scan Select
Group Scan Select
SELECTIVE CALL
Sending Selective Call
Answering a Selective Call
Speaker ON
The external speaker is ON or the
external speaker and the control
head speaker are ON.
Speaker Mute
The external and control head
speaker are mute.
Selectable Tone
The predefined Sub Audio Squelch
System is operating on the current
Conventional Personality.
Horn Alert
The external alarm feature is ON.
Public Address
The Public Address amplifier is ON.
1 Press the preprogrammed T oggle High/Low Power
PF Button .
2 If High Power was previously selected, "- LP ON -" will
be displayed on the LCD and the low transmit power
is turned ON.
3 If Low Power was selected previously, "- LP OFF -"
will be displayed on the LCD and the high transmit
power is turned ON.
Press the preprogrammed Emergency PF Button or
Emergency Footswitch. The Tx LED will blink solid red.
An emergency tone will sound. The display shows the
emergency code if the Digital ANI option board is present
or "EMERGENCY" if the option board is not present.
Press and hold the preprogrammed Emergency PF
Button when receiving or turn the radio OFF.
Annunciator Indication
1 Press the preprogrammed Toggle Scan On/Off PF
Button .
2 The display shows "- SCAN -" and scan is activated.
3 Press the preprogrammed Toggle Scan On/Off PF
Button again to enter Group Scan (provided minimum
2 scan groups have been created).
4 The display shows "- G SCAN -" and group scan is
activated.
1 Press the preprogrammed Scan Select PF Button .
2 If the selected channel is added into the scan list, the
display shows "- STOP -" and "SCN".
3 If the selected channel is removed from the scan list,
the display shows "-SKIP -"
1 Press the preprogrammed Group Scan Select PF
Button .
2 If the selected group is added into the group scan list,
the display shows "- STOP -" and "_<Group
Number>".
3 If the selected group is removed from the group scan
list, the display shows "-SKIP -" and "<Group
Number>. The "_" are not shown.
1 Press the PTT button to transmit the displayed ID
number.
2 After the tone, speak into the microphone.
1 When receiving a Selective Call, the display shows
"SEL CALL". You will hear a special tone.
2 Press the PTT button to answer the call.
Action LED Condition Meaning
Continuous,
medium pitched
tone Emergency
alarm
Group of 3
medium pitched
tones Unsuccessful
power-up. Radio
failed self-test.
Radio not ready
for use. Contact your
service
representative.
Short, low
pitched tone Time-out timer
warning.
Transmission
time will expire in
ten seconds.
Time-out timer
out.
Transmission
was terminated.
Release PTT
button
Short, medium
pitched tone Valid key
press. A key
press was
accepted.
Short, high
pitched tone Successful
power-up. Radio
passed self-test.
Group of 6
medium pitched
tones Selective Call
received. The selective
call successful
received and
decoded.
(blinking)
PM1200.book Page 47 Wednesday, October 10, 2007 2:44 PM