10
Getting Started
2.6
Mounting the Camera
You can place the Camera indoor on a shelf, countertop or table, or mount it on
the wall using the included magnetic mounting plate. There is a keyhole slot
opening on the back of the magnetic mounting plate where a screw (12mm) fits
to keep the mounting plate in place on the wall.
Warning!
Please ensure that the magnetic mounting plate is mounted on a secure and
stable wall.
Please ensure that the Orbit Camera is mounted in areas that are not exposed
to unfavorable environmental conditions including, but not limited to, excessive
vibration, humidity and wind.
Keyhole slot on the back of
the mounting plate
Mounting
plate
Best mounting position
• Mark your mounting point with
a pencil.
• Fix a suitable 12mm mounting
screw (the screw head must fit
into the keyhole slot on the back
of the mounting plate) into the
mounting point.
• Fit the magnetic mounting plate
over the screw head in the
keyhole slot, and keep adjusting
the screw depth until the
mounting plate fits firmly.
• Ensure that the back cover is
attached to the Camera, and
then stick the Camera to the
magnetic mounting plate.
(
Note: extreme angles or
orientation may be limited
with magnetic mount.
)
• Check
your
Camera’s
view
by
looking at its live stream in
“
Hubble Home
”, and adjust the
position if you need to.
Back cover
Press here to
unlock and remove
the back cover.
