9
Eng
lish
Subsequent connections with a different wireless adapter
(Audio and Data Devices):
1. Unpair the wireless device.
2. Once the wireless device is powered ON, it goes into
Pairing Mode automatically.
3. Follow steps 2-8 from “Pairing Your Audio Device” in the
previous section.
Unpairing the Wireless device (Audio and Data Devices):
1. Power OFF the wireless device.
2. Press and hold the PTT button while powering ON the
wireless device.
If the Wireless Device has been paired with a radio and needs
to now be paired with a different radio, the Wireless Device is
required to clear its previous pairing information. This can be
achieved by pressing the PTT on the Wireless Device while
powering it on. Refer to “Pairing Your Audio Device” on page 7
to re-establish wireless connection.
State
LED Indication
(Audio and Standalone
PTT Device)
Tone Indication
(Audio Device)
Not Paired
Blue LED Blinking
Pairing Ready Tone
Paired
Successfully
Blue LED Solid for 2
seconds
Pairing Successful
Tone
Wireless Link
Connected with
Host
Blue LED Heartbeat:
Long OFF and Short
ON
Connected Tone
Wireless Link
Disconnected
from Host
Blue LED Solid ON
Disconnected Tone
every 2 minutes for 10
minutes
Table 3: Wireless Link and Pairing Indicators
68012002053_combine.book Page 9 Friday, March 25, 2011 11:01
