background image

  

APPENDIX C — INITIALIZATION INFORMATION 
 

59

 

Typical OM BOOTP Packet Files 

The BOOTP packet file mix is not fixed, as files are added/removed consistent with 
OM functionality enhancements. A typical list of files is as follows: 

Filename Purpose 

 

OM2000.fof 

File of files that contains three field columns: source path, destination 
path, and force flag. 

Do not change the symbolic name of the OM in the second field, as it 
can cause an initialization failure.

 

OM2000.cod 

Host application code for main OM processor 

OM2000.ini 

Contains OM configuration settings for application firmware 

Fec_fpga_v01.rbf 

Field programming gate array personality file for FEC FPGA 

OMem.jar 

Executable OM-EM Java based application 

OM2000.HST 

Example Hosts File 

OM2000.SVC 

Example Services File 

OM2000.GTW 

Example Gateways File 

OM2000.HTM 

HTML File used by internal HTTP Server 

Reference Specifications 

To support TFTP and BOOTP the OM conforms to the following RFC specifications: 

 

BOOTP Vendor Extensions, RFC 2132 

 

Bootstrap Protocol, RFC 951 

 

The TFTP Protocol, Revision 2, RFC 1350 

 

Clarifications and Extensions for the Bootstrap Protocol, RFC 1542 

Refer to these specifications for complete information on the BOOTP packet format 
and field descriptions. 

Summary of Contents for OM 2000


















































































Reviews: