2 OVERVIEW
15
Key Connector/Indicator
Description
6
–20 dB test RF monitor jack is an F-type connector that permits
convenient monitoring of the RF output at the front panel.
7
The OM 2000 display shows the IP address and RF frequency
configured on the device.
Input/Output and Power Connections
Figure 2-7 illustrates the OM 2000 rear panel input/output connectors, power
connector, and fans:
Figure 2-7 — Rear panel
Table 2-4 identifies each connector and describes its function:
Table 2-4 — OM 2000 input/output and power connections
Key Connector
Description
1
The AC power input connector accepts inputs from
100 through 240 V AC (50 through 60 Hz).
1
The DC power input connector accepts inputs from
–40 through –60 V DC.
2, 5
Two field replaceable fans extend from the rear of
the OM. To replace a fan, reference Appendix D,
“Fan Field Replacement Procedure.”
