Motorola NETOPIA 2210-02, User Manual

Page: 4 / 111

4
ENGLISH
1. Insert the included CD into your CDROM drive and follow the instructions pro-
vided.
2. Locate the Modem near a power source, a DSL wall outlet, and in a location
where air can circulate freely around it.
3. Connect the rounded end of the power supply to the power jack on the back panel
of the Modem. Then, plug the power supply into an electrical outlet.
The
Power
LED should light solid green.
4. Connect one end of the gray RJ-11 Phone cable to the port labeled “DSL” on the
Modem. Connect the other end of the Phone cable to your DSL wall outlet.
5. Connect one end of the yellow RJ-45 Ethernet cable to the port labeled “Ethernet”
on the modem. Connect the other end of the Ethernet cable to the Ethernet port on
your PC.
Connections
2
Uncontrolled Document