Motorola MW800 Series, Owner'S Manual

Page: 18 / 29

Display Unit Overview 11
touchscreen calibration, see “Calibrating the Touchscreen”, on
page 48.
Display Connections
The rear panel of the display shows the following connectors:
Figure 6
Display - Connectors
A screen saver should be used.
Do not display a single image on screen for an extended
period of time.
Note
!
Caution
Display Power
Display In
USB Port 2
USB Port 1
Connector Description
Display Power DC connector for vehicle. Requires a standard Motorola
power cable with 15 A fuse
Display In RGB, USB and Sound from workstation
USB 1 & USB 2 Ports USB 1 to Keyboard and USB 2 to any peripheral device.
(Note that all full-speed USB devices must be connected
directly to the USB port, on the workstation)
Owner'sManual800.book Page 11 Tuesday, March 11, 2003 12:19 PM