Motorola MVMS User Manual Download Page 62

Page: 62 / 90

MVMS

Management Server User Manual

You can set the time manually or automatically as needed.

11.7

OSD Position Configuration

Click Home



Local Configuration



OSD Position Config to go to the following interface.

Drag the slider to the position you want to show the OSD and then click ―Apply

‖

to save the settings.

11.8

System Configuration

Click Home



Local Configuration



System Config to go to the following interface.

In this interface, you can enable ―Alarm preview using third stream

‖

or ―Do not display the alarm without schedule

‖

Enable and set the same alarm reporting interval and its linked alarm type.

Choose ―Synchronize devices

‖

and ―Synchronize Time Zone

‖

and then click [Synchronize Platform Time] to synchronize the device times

with the time of the platform.

11.9

Audio Uploading

Go to Home



Local Configuration



Audio Uploading.

Click [Add] to bring the following box.

Click [Browse] to choose the audio file and then enter the audio name. Click [OK] to save this audio. After the audio is uploaded

successfully, you can listen to it.

Summary of Contents for MVMS



























































































Search results

Summary of Contents for MVMS

Reviews:

Related manuals for MVMS

Brands by name

Popular brands

Motorola MVMS, User Manual

Search results

Summary of Contents for MVMS

Reviews:

Related manuals for MVMS

Brands by name

Popular brands