1
MVME3100 Programmer’s Guide (V3100A/PG1)
1
1
Board Description and Memory Maps
Introduction
This chapter briefly describes the board level hardware features of the MVME3100 single-board
computer, including a table of features and a block diagram. The remainder of the chapter provides
memory map information including a default memory map, MOTLoad’s processor memory map, a
default PCI memory map, MOTLoad’s PCI memory map, system I/O memory map, and other
configuration registers.
Overview
The MVME3100 is a single-slot, single-board computer based on the MPC8540 PowerQUICC III™
integrated processor. The MVME3100 provides serial ATA (sATA), USB 2.0, 2eSST VMEbus interfaces,
dual 64-bit/100 MHz PMC sites, up to 256MB of Flash, dual 10/100/1000 Ethernet, one 10/100
Ethernet, and five serial ports. This board supports front and rear I/O and a single SODIMM module for
DDR memory. Access to rear I/O is available with a rear transition module (RTM).
Figure 1-1
shows a block diagram of the MVME3100 and
Table 1-1
lists the features of the MVME3100.
