background image

MVME197IG/D1A1

1-1

1

BOARD LEVEL

HARDWARE DESCRIPTION

Introduction

This chapter describes the board level hardware features of the MVME197DP
and MVME197SP versions of the MVME197 series of Single Board Computers,
hereafter referred to as the MVME197, unless separately specified (refer to the
next section for model designations).

The chapter is organized with a board level overview and features listed in this
introduction, followed by a more detailed hardware functional description.
Front panel switches and indicators are included in the detailed hardware
functional description. This chapter closes with some general memory maps.

All programmable registers used in the MVME197 module series reside in
ASIC (Application-Specific Integrated Circuit) devices that are covered in the

MVME197LE, MVME197DP, and MVME197SP Single Board Computers
Programmer’s Reference Guide

.

Model Designations

The MVME197DP/SP module series of the Single Board Computers are
available in the following models.

Table 1-1.  MVME197DP/SP Model Designations

Model

Number

Motorola

Part Number

Model Description

MVME197SP series

MVME197-101

01-W3815B04

Single Processor MC88110, 256KB Cache, 128MB
Onboard ECC DRAM, 50 MHz

MVME197DP series

MVME197-201

01-W3815B03

Dual Processor MC88110, 256KB Cache per Processor,
128MB Onboard ECC DRAM, 50 MHz

Summary of Contents for MVME197DP













Reviews: