2-2
Computer Group Literature Center Web Site
Startup and Operation
2
Pre-Startup Check
Before you power up the MVME167P system, be sure that the following
conditions exist:
1. Jumpers and/or configuration switches on the MVME167P Single-
Board Computer and associated equipment are set as required for your
particular application.
2. The MVME167P board is installed and cabled up as appropriate for
your particular chassis or system, as outlined in Chapter 1.
3. The terminal that you plan to use as the system console is connected to
the console port (serial port 1) on the MVME167P module.
4. The terminal is set up as follows:
❏
Eight bits per character
❏
One stop bit per character
RUN LED (DS3, green)
CPU activity. Indicates that one of the local bus masters is
executing a local bus cycle.
SCON LED (DS4, green)
System controller. Lights when the VMEchip2 ASIC is
functioning as VMEbus system controller.
LAN LED (DS5, green)
LAN activity. Lights when the LAN controller is functioning as
local bus master.
+12V LED (DS6, green)
Fuse OK. Indicates that +12Vdc power is available to the LAN
interface.
SCSI LED (DS7, green)
SCSI activity. Lights when the SCSI controller is functioning as
local bus master.
VME LED (DS8, green)
VME activity. Lights when the board is using the VMEbus or
being accessed from the VMEbus.
Table 2-1. MVME167P Front Panel Controls (continued)
Control/Indicator
Function
