Motorola MTP8550Ex Page 172 Feature User Manual Download

Page: 172 / 176

Message

Message Description

Sending of file failed

The file could not be sent via Bluetooth due to a connec-
tion problem.

Service Denied

Invalid number. Call your service provider.

Service Not Available

This service is not available on the current network.

Service Restricted

This service or feature is restricted by your service provid-
er, it has not been purchased, or it is not available.

TalkGrp

...

cannot be deleted

Your service provider set this group so you cannot delete it
from the favorite talkgroup folder.

Try Again Later

The requested service is temporarily unavailable.

Radio Disabled

Check with your service provider.

Unit is OK

Warn:

Self-test error. A minor fault has been detected. Your radio
is still fully operative. If this error recur, note the error code
and contact service.

Unit Not Attached

Your radio could not attach to the system. The talkgroup
may not be defined in the system. Please try another
group.

Warning SD card not format-
ted correctly

The microSD card installed in your radio is not formatted
correctly. To format it, contact your service provider.

Warning: Space for less
than 10 picture signatures
left!

Radio internal memory is running out of space and no
more than 10 Digital Fingerprints can be saved.

Not enough space to store
picture signature!

Radio internal memory is full and no Digital Fingerprint can
be saved.

MN002041A01-AH
Appendix C: Troubleshooting

172

Summary of Contents for MTP8550Ex
















































































































































































Search results

Summary of Contents for MTP8550Ex

Reviews:

Related manuals for MTP8550Ex

Brands by name

Popular brands

Motorola MTP8550Ex, Feature User Manual

Search results

Summary of Contents for MTP8550Ex

Reviews:

Related manuals for MTP8550Ex

Brands by name

Popular brands