Motorola MTP3250 Feature User Manual Download

Page: 77 / 157

4.3.9.3.1

Sending Targeted Status Messages

Procedure:

From the home screen, press the

Menu

key.

Select

Messages

→

Send Status

Perform one of the following actions:

• Highlight the required status message and press the

Send

key.

• If the status list is empty, enter a 5-digit status message number and press

Send

Do one of the following:

• Enter the number or press

abc

to select the name from your contact list. Press

Send

• Select the required talkgroup from the

TalkGroup List

The display shows one of the following delivery reports:

•

Status Sent

•

Status Failed

4.3.10

Sending an RMS Status

Prerequisites:

This feature is only available when enabled by your service provider. See

Radio

Messaging System (RMS) on page 136

for details.

Procedure:

Perform one of the following actions:

If…

Then…

If the radio is in the
RMS mode,

go to

step 2

If the radio is not in
the RMS mode,

Perform one of the following actions:

• From the home screen, press

Menu

→

Messages

→

Send

RMS/FMS

• Press and hold the One Touch Button configured to display

the

Send RMS/FMS

menu.

• Use a menu shortcut assigned to the

Send RMS/FMS

menu.

Go to

step 2

NOTICE:

The navigation through the radio menu is only available if your service provider

enabled the

Send RMS/FMS

menu item. However, your service provider can configure a

One Touch Button to display the

Send RMS/FMS

menu even if the navigation is not

possible.
If the radio is not in RMS Mode, and the

Send RMS/FMS

menu item is disabled, and no

One Touch Button is configured to display the

Send RMS/FMS

menu, then the radio can

only receive RMS messages but cannot send them.

Perform one of the following actions:

• Press and hold a required key (for RMS status 0–9).

• Press the required two keys combination (for RMS status 10–99).

68015000899-FH

Chapter 4: Main Menu

Summary of Contents for MTP3250





























































































































































Search results

Summary of Contents for MTP3250

Reviews:

Related manuals for MTP3250

Brands by name

Popular brands

Motorola MTP3250, Feature User Manual

Search results

Summary of Contents for MTP3250

Reviews:

Related manuals for MTP3250

Brands by name

Popular brands