Motorola MT2070 User Manual Download

Page: 266 / 606

9 - 2

MT2070/MT2090 User Guide

Connecting a USB Interface

Figure 9-1

USB Connection

The device connects with USB-capable hosts including:

•

Desktop PCs and notebooks

•

Apple™ iMac, G4, iBooks (North America only)

•

IBM SurePOS terminals

•

Sun, IBM, and other network computers that support more than one keyboard.

The following operating systems support the device through USB:

•

Windows

98, 2000, ME, XP

•

MacOS 8.5 - MacOS 10.3

•

IBM 4690 OS.

The device also interfaces with other USB hosts which support USB Human Interface Devices (HID).

USB Connector

Interface Cable

NOTES

Connect a power supply to the cradle (not shown) for fast charging.

When connecting the host cable directly to the device, the host cable should not be attached to or

detached from the device more than once a day (to prevent excessive contact wear).

If connecting ActiveSync via USB, it is recommended you use an ESD dongle with the USB cable. (ESD

part numbers KT-8830-03R -3 piece kit, or KT-8830-10R - 10 piece kit.)

Summary of Contents for MT2070































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MT2070

Reviews:

Related manuals for MT2070

Brands by name

Popular brands

Motorola MT2070, User Manual

Search results

Summary of Contents for MT2070

Reviews:

Related manuals for MT2070

Brands by name

Popular brands