Motorola MP6000, Integrator Manual

Page: 177 / 210

OPERATING THE SCANNER 5 - 23
Macro PDF buffer
out of memory 3 Long Low Beeps No change No change Out of memory. There is not
enough buffer space to store the
current MPDF symbol.
Macro PDF bad
symbology
encountered 4 Long Low Beeps No change No change Bad symbology. Scanned a 1D or
2D bar code in a MPDF sequence,
a duplicate MPDF label, a label in
an incorrect order, or trying to
transmit an empty or illegal MPDF
field.
Macro PDF buffer
flushed 5 Long Low Beeps No change No change Flushing MPDF buffer.
Macro PDF
aborted Fast Warble Beep No change No change Aborting MPDF sequence.
Macro PDF buffer
flushed with no
data Low, High Beeps Red No change Flushing an already empty MPDF
buffer.
Scale: See Table 4-6 on page 4-21 for scale conditions and displays.
Standard Use
System power-up Low, Medium, High
Beeps None No change Power up.
System reboot Loud two seconds
beep No change for
10 seconds. Red
for last two
seconds. No change After holding the EAS and Volume
buttons for 10 seconds, the
MP6000 reboots.
Bar code decoded Off, Low, Medium,
High, two-tone beep,
or TBD tone
(programmable) Fan-out LED
sequence. No change MP6000: LEDs arranged in a
linear fashion will turn on in
sequence; Center, then the two
immediate surrounding LEDs, then
the two outermost LEDs.
System is idle None Dim green
(center LED
only) No change Ready for decode.
System is
disabled None No change, red:
warning No change Host application has sent
SCAN-DISABLE command.
Bar code data
transmission error 4 Low Beeps Red No change Transmission error.
Bar code data
conversion error 5 Low Beeps Red No change Conversion or Format error.
RS-232 host
parity error Low, Low, Low, Extra
Low Beeps Red No change RS-232 Receive error.
Table 5-1
Beeper and LED Indicators (Continued)
Condition Beeper Indication
System LED
Indication
Button LED
Indication
Description