manualshive.com logo in svg

Motorola MOTORIZR Z6TV, Service Manual

Share
Download
Motorola MOTORIZR Z6TV Service Manual Download Page 10

10

February 19, 2008 

6809513A80-B

Product Overview

 Z6m/Z6tv CDMA

• Games (embedded & downloadable)
• PC synchronization via high speed USB
• Acoustic reliability with separate speakers for alert and earpiece

Speaker Dependent Voice Activation and Voice Note Recording

Voice tags can be used for voice dialing up to 20 phone numbers in the phone book 
and for creating up to 5 voice shortcuts for menu items. The phone must be “trained” 
by the voice tag being read into the phone’s memory twice before it is recognized.

You can add voice tags to the phone’s memory using the usual name addition 
methods (i.e., via the phone book menu structure or with the shortcut editor). 

Z6m/Z6tv telephones also include a voice recorder that allows up to 2 minutes of 
personal messages to be recorded. This feature has a complete set of record, 
playback, and management tools that make it easy to store and maintain a list of 
personal memos.

➧

You cannot place or receive calls while adding voice tags to the phone’s memory.

Summary of Contents for MOTORIZR Z6TV




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands