Motorola MOTONAV TN500 Series, Quick Start Manual

Page: 9 / 116

7 set it up
set it up
let’s get you up and moving
turn it on/off or lock it
The Power Switch is located on the top of the device.
set it up
When you first turn on your device, your MOTONAV walks
you through these easy steps:
1 Select a language, then tap Next .
2 Set the regional settings ( Time Zone , Distance Units , and
Temperature Units ), then tap Next .
3 Choose the side for the Zoom and Volume buttons,
then tap
Next . Or customize one of the buttons with
your favorite function, then tap Next .
4 Read and accept the Safety Warning, then tap Next .
5 Read the End User License Agreement, tap Agree , then
tap Next .
6 Tap Yes and follow the prompts to connect to connect
your Bluetooth® enabled mobile phone. Or tap Skip to
do it later. (To connect later, see “connect it” on
page 8.)
7 Tap Yes to see a tutorial or tap Skip to view it later.
Tip: To view the tutorial later, tap Settings > Help > Tutorial .
8 Tap Done to start using your device.
9 View trial licenses for MotoExtras services and Safety
Cameras.
turn on/off To turn the display on or off, slide and
release the button left (toward
).
lock To lock the screen and rear buttons, slide
the button right (toward
). The device
stays on if it was on when locked.
Acquiring Satellites
To receive a strong signal, make sure your device has an
unobstructed view of the sky. It may take a few minutes
for your device to locate satellites the first time you turn
the power on.