Motorola MOTONAV TN500 Series, Quick Start Manual

Page: 22 / 116

20 messages
1 Tap the map, then tap Main Menu > Messaging > Create Message .
2 Select Custom Message to type a message, My Location to
send your current location, or any of the pre-written
text messages.
3 Tap Send To .
4 Select a contact.
5 Tap Send .
receive messages
When you receive a new text message, your device shows
a new message notification. Tap
Open to read the message
or say “open” to hear the message read out loud. You can
reply to call the sender.
Tip: No time right now? To read your messages later, tap
Main Menu > Messaging .
trusted contacts
There are some people who always want to know where
you are. With trusted contacts, you can let them know
automatically.
1 Tap the map, then tap Main Menu > Trusted Contacts .
2 Tap Location Share .
3 Select a contact.
4 Tap Always Ask if you want to be asked each time before
sending your location or Always Allow if it’s OK to share
your location with the contact always.
If your MOTONAV is connected with your mobile phone,
you can automatically share your current location with a
trusted contact when they text “
motonav ” to you. When
you’re not in a route, your current location is shared with
your trusted contact. When in a route, you share your
location, destination, and your estimated time of arrival
(ETA).
Tap anywhere on this bar to
hear the text
m essage aloud.
Tap to read the
text
m essage.