31
File management
File management
move music and more to your device
USB connection
To transfer music from your computer to MOTOACTV,
use MotoCast USB. You can also drag and drop files to
MOTOACTV if you connect it to your computer as a
mass storage device.
Note:
The first time you use a USB connection, your
computer may indicate that drivers are being installed.
Follow any prompts you see to complete the installation.
This may take a few minutes.
1
Connect a Motorola micro USB data cable from your
device’s micro USB port to a USB port on your
computer. Your device connects to your computer as
mass storage.
Note:
Make sure to connect to a high power USB
port. Typically, these are located directly on your
computer.
2
Drag and drop files between your computer and
MOTOACTV. When you’re done, use “Safely Remove
Hardware” before disconnecting the USB cable.
Troubleshooting
we’re here to help
Motocast ID
You can check to see if you successfully linked your
device with your MotoCast ID.
Find it:
Settings
>
Personal Profile
and look for your
Motocast ID
Reset
To reset your device to factory settings, touch
Settings
>
General
>
Factory Reset
, then touch
Reset
.
Warning:
Resetting will erase all personal data on your
MOTOACTV, including your unsynced workouts. Your
music content will remain on the device. Your data on
MOTOACTV.com will not be deleted.
In the rare event that your device locks up, press the
Power key and START WORKOUT key simultaneously
for more than seven seconds.
