17
If no key is pressed for 30 seconds, the handset or base will automatically exit programming and
return to standby screen.
8.3
Phone Settings
1. In idle mode, press
MENU
softkey (on base) or
Menu/Flash
(on cordless handset) to go to the
main menu.
2. Using
VOL +
and
VOL -
of the navigation button to scroll to
PHONE SETTINGS
.
3. Press
SELECT
softkey and you may program the following items:
On your base:
DATE/TIME
AUTO ANS INTERCOM
TONE/PULSE DIAL
AREA CODE
REMOVE HANDSET
2ND CALL ALERT
UPDATE HS LIST
On your handset:
AUTO ANSWER
AUTO ANS INTERCOM
REGISTRATION
2ND CALL ALERT
HANDSET NAME
8.3.1 Date/Time
The
DATE/TIME
option only exists in base menu, handset Date/Time should update automatically
after it is set in the base.
From the
PHONE SETTINGS
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
DATE/TIME
. Press
SELECT
softkey.
2. The base will display the last-set time (or, if the device is new or has been reset to default, the
base will display
12:00AM 01/01/11
)
3. Using the dial pad to enter digits for the current time and date.
4. Using
DIR
and
CID
of the navigation button to move the cursor and the
AM/PM
softkey to set
the time
AM
or
PM
.
5. When you are finished, press
SAVE
softkey.
NOTE
If you subscribe to Caller ID service, the current Date/Time is set automatically when you receive
your first CID record and will override manually set Date/Time. However, the Year must still be set
manually. The Year information is not in the CID record.
8.3.2 Auto Answer
When it is set to on, this allows you to pick up the handset from the charging cradle to answer an
incoming call without pressing
t
,
s
,
LINE 1
or
LINE 2
softkey.
From the
PHONE SETTINGS
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
AUTO ANSWER
. Press
SELECT
softkey.
2. Using
VOL +
and
VOL -
of the navigation button to scroll to
ON
or
OFF
.
3. Press
SELECT
softkey to save your selection.
NOTE
The default setting is
OFF
.
8.3.3 Auto ANS Intercom
When it is set to on, the cordless handset or base will auto answer the intercom call when it
receives an intercom call.
