manualshive.com logo in svg

Motorola MK1200, Product Reference Manual, Page: 66 / 232

Share
Download
Motorola MK1200 Product Reference Manual Download Page 66

3 - 20 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide

Control Panel Configuration Parameters

On touch-enabled configurations, when using the Windows

®

 desktop Control Panel to modify certain MK1200 

configuration settings, select 

Start > Programs > Save Configuration

 on the MK1200 to save certain parameter 

changes to the mkconfig.reg file and retain them across power cycles. If not saved, the MK1200 defaults to the 
original mkconfig.reg parameter values upon the next power sequence. 

The Control Panel can set the following options:

•

Backlight and Contrast Settings on page 3-20

•

Button Definitions on page 3-21

•

Date and Time on page 3-21

•

Inactivity Manager on page 3-22

•

Gate Keeper (Password Protection) on page 3-23

•

Stylus Settings/Touch Screen Calibration on page 3-23

•

Regional Settings on page 3-25

•

Memory Allocation on page 3-26

.

For best results, use the system menu for all permanent changes (except recalibrating the touch screen).

Backlight and Contrast Settings

To change the backlight intensity on the MK1200:

1.

Tap 

Start > Settings > Control Panel

.

2.

Double-tap the 

Backlight & Contrast

 

icon from the 

Control Panel

 window.

Figure 3-4    

Backlight & Contrast Screen

3.

Select the backlight intensity by tapping the radio button.

4.

If necessary, change the contrast by tapping the arrows next to the 

Contrast

 field.

5.

Tap 

OK 

or 

X

 to close the screen to apply the selection.

Summary of Contents for MK1200









































































































































































































































Reviews:

No comments