Minitor IV
Pager Programming Guide
Getting
Started
Note:
How to check which COM port the USB port is mapped to
•
From desktop, right click on
My Computer
•
Select
Properties
.
•
Choose the
Hardware
tab
•
Click on
Device Manager
button from the second group – Device
Manager
•
Expend the
Ports (COM & LPT)
item
•
From there, you can see which COM port the USB port is mapped
Here is an example of device manager window. In this case, the cable is
RadioShack USB to Serial cable. It is mapped to COM8
Figure 2 Device Managers
2. Connect DB25 end of the selected cable to the DB25 connector of the
programming interface.
3. Connect the programmer cable end with the phone jack to the programming
interface.
4. Plug the coiled cable into the Minitor IV programmer nest and
programming interface.
5. Connect
AC/DC
adapter/power
supply to programming interface.
6. Plug AC/DC adapter/power supply into wall outlet.
7.
Hardware installation is complete.
6880309M81-A 9/20/2004
3
