Minitor IV
Pager Programming Guide
Getting
Started
Group Field
Name Description
Model Number
This non-editable field displays the model
number programmed into the pager at the
factory and should match the model number
on one of the labels attached to the pager.
Serial Number
This non-editable field displays the serial
number programmed into the pager at the
factory and should match the serial number
on one of the labels attached to the pager.
Band Split
This non-editable field displays the band split
programmed into the pager at the factory.
The pager’s working frequency has to be
within this band split.
X’Tal value
This non-editable field displays the CPU
clock for tone decoder chip. This is a
reference field for repairing.
IF
This non-editable field displays the
intermediate frequency.
Pager
Information
Injection
This non-editable field displays the injection
direction.
Codeplug
Version
This non-editable field displays the codeplug
version.
Revision
Pager Firmware
Version
This non-editable field displays the pager
firmware software version.
System
(Motorola, GE,
Plectron, User,
Fast Plectron)
Select the type of system that the address
tones will be selected for. If a system other
than USER is selected, then tones pertaining
to the selected system are the only tones
available for programming. If USER is
selected, then any address tone frequency can
be entered if proper tone spacing is
maintained.
Tone
System
Information
Frequency
Minitor PPS only accepts tone frequency
input. No tone code is supported.
Table 3 General Information Page Fields
Channel
The model number determines how many channels a pager supports. If more
than one channel is supported, more channel pages will be added to the User
Data property sheet. Here is an example for channel 1.
6880309M81-A 9/20/2004
9
