Motorola MILESTONE 3, User Manual, Page: 69 / 222

General Radio Operation
Selecting a Zone
Your radio must be preprogrammed to allow you to use this
feature.
A zone is a group of channels. The following methods are
options on how to select a radio zone. The result of all the
methods is the same. You can use the options
interchangeably depending on your preference and the
programmed functions.
• Select a zone via the radio menu
Zone
:
a. or to
Zone
and press the Menu Select
button directly below
Zone
.
b. or to the required zone, or use the
keypad to enter the zone number.
If the zone number entered is unprogrammed, the
display shows
Invalid entry
. Repeat this step.
c. Press the Menu Select button directly below
Sel
to confirm the displayed zone.
d. Press the PTT button to transmit on the displayed
zone channel.
• Select a zone via the radio menu
ZnUp
or
ZnDn
:
a. or to
ZnUp
or
ZnDn
.
b. Press and hold the Menu Select button directly
below
ZnUp
or
ZnDn
until the required zone
appears.
Positions of
ZnUp
and
ZnDn
on the display may
differ each time you release the Menu Select
button. Read carefully before you press.
c. Press the PTT button to transmit on the displayed
zone channel.
Selecting a Radio Channel
A channel is a group of radio characteristics, such as
transmit/ receive frequency pairs. The following methods
are options on how to select a radio channel. The result of
all the methods is the same. You can use the options
interchangeably depending on your preference and the
programmed functions.
• Select a channel via the preprogrammed 16–
Position Select Knob to the desired channel.
English
Send Feedback
69
Draft