Motorola MILESTONE 3, User Manual, Page: 129 / 222

• New Service Advertisement for service availabilities
The radio with Two-Factor capabilities are backward
compatible with the existing device registration system and
TMS servers.
System Setup for ASTRO Advanced
Messaging Solution
Your user name, unit ID and password all need to be
provisioned in PremierOne
™
. Your user account in
PremierOne needs to be linked to an RSA account
specifying a token to be used with the Two-Factor
passcode.
The radios caches the user name, unit ID and or Single
Factor password in the codeplug, this allows the radio to
automatically log in to use Single Factor authentication
upon power up or mode change. The Two-Factor passcode
is not stored in the codeplug. You can upgrade the Single
Factor session to a Two- Factor session by entering the
Two-Factor passcode only. After an interruption (for
example mode change, DSR switch over, power loss), the
radio is capable of restoring the active session in its current
state as long as the session is active in the server.
NOTE:
Power loss and power down are different activities,
power down occurs when the user intentionally
powers off the radio, power loss is when the battery
dies or is removed from the unit.
Two-Factor Authentication
Two-Factor Authentication is an extension of existing ARS
and TMS operation. This feature allows you to authenticate
yourself with a username, unit ID, password and passcode.
The purpose of this feature is to allow the sender of a text
message to address a specific user of the radio, so the
message is delivered to the user, not to the radio which
may have any user using it at the time.
Secondly, this feature supports query authentication
requirements so the query service knows which user
originated a query.
You can still send text messages without logging in as a
user. The user login feature only enables the recipient of
your message to identify you as the sender by assigning a
username to your message.
NOTE:
A predefined username that is set more than the
maximum allowed characters is an invalid name.
English
Send Feedback
129
Draft