background image

Safety and General Information 

Important Information on Safe and Efficient Operation 

Read This Information Before Using Your Radio. 

The  information  provided  in  this  document  supersedes  the  general  safety  information  in  user 

guides published prior to December 1, 2002. 

Transmit and Receive Procedure 

Your  two-way  radio  contains  a  transmitter  and  a  receiver.  To  control  your  exposure  and  ensure 

compliance with the general population/uncontrolled environment exposure limits, always adhere 

to the following procedure: 

• Transmit no more than 50% of the time. 

• To receive calls, release the PTT button. 

• To transmit (talk), press the Push to Talk (PTT) button. 

Transmitting  50%  of  the  time,  or  less,  is  important  because  the  radio  generates  measurable  RF 

energy exposure only when transmitting (in terms of measuring standards compliance). 

Exposure to Radio Frequency Energy 

Your  Motorola  two-way  radio  complies  with  the  following  RF  energy  exposure  standards  and 

guidelines: 

• United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 

sub-part J. 

•  American  National  Standards  Institute  (ANSI)/Institute  of  Electrical  and  Electronic  Engineers 

(IEEE) C95. 1-1992. 

• Institute of Electrical and Electronics Engineers (IEEE) C95. 1-1999 Edition. 

• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998. 

•  Ministry  of  Health  (Canada)  Safety  Code  6.  Limits  of  Human  Exposure  to  Radiofrequency 

Electromagnetic Fields in the Frequency Range from 3 KHz to 300 GHz, 1999. 

•Australian 

Communications 

Authority 

Radio 

communications 

(Electromagnetic 

Radiation—Human Exposure) Standard, 2003. 

• ANATEL ANNEX to Resolution No. 303 of July 2, 2002 “Regulation of limitation of exposure 

to electrical, magnetic and electromagnetic fields in the radio frequency range between 9 KHz and 

300GHz”. 

To  ensure  optimal  radio  performance  and  make  sure  human  exposure  to  radio  frequency 

electromagnetic energy is within the guidelines set forth in the above standards, always adhere to 

the following procedures. 

 
Portable Radio Operation and EME Exposure 

Antenna Care 

Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, 

or attachments could damage the radio and may violate FCC regulations.

 

Do NOT hold the antenna when the radio is “IN USE.” Holding the antenna affects its effective 

range. 

Body-Worn Operation 

To maintain compliances with FCC/Health Canada RF exposure guidelines if you wear a 

Summary of Contents for MG160 Series










Reviews: