manualshive.com logo in svg

Motorola MC3000, User Manual

Share
Download
Motorola MC3000 User Manual Download Page 102

4 - 2

MC3000 User Guide

SD Card

The SD card provides additional storage capacity for the mobile computer.

Plastic Holster

The Plastic Holster provides a clip on holder for the mobile computer.

Fabric Holster

The Fabric Holster provides a clip on holder for the mobile computer.

Single Slot Serial/USB Cradle

The Single Slot Serial/USB cradle:

• Provides 5.4VDC power for operating the mobile computer, charging the battery and charging a spare 

battery.

• Provides a serial port and a USB port for data communication between the mobile computer and a host 

computer or other serial devices (e.g

.

, a printer).

• Synchronizes information between the mobile computer and a host computer. With customized or third party 

software, it can also synchronize the mobile computer with corporate databases.

• Provides serial connection through the serial pass-through port for communication with a serial device, such 

as a host computer. For communication setup procedures, refer to the 

MC3000 Integrator Guide

.

• Provides USB connection through the USB pass-through port for communication with a USB device, such as 

a host computer. For communication setup procedures, refer to the 

MC3000 Integrator Guide

.  

Battery Charging

The Single Slot Serial/USB cradle can charge the mobile computer main battery and a spare battery 

simultaneously.

To charge the mobile computer:

1. Slide the mobile computer into the mobile computer slot. The mobile computer amber Charge LED Indicator, 

indicates the mobile computer battery charging status. The Standard Battery charges in less than four hours 

and the Extended Life Battery charges in less than six hours. See 

Table 4-1

 for charging status indications.

CAUTION

Ensure that you follow the guidelines for battery safety described in 

Battery Safety Guidelines on page 5-1

.

CAUTION

Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an alternative 

power supply will void the product warranty and may cause product damage. See 

Appendix C, Regulatory

 

for the power supply regulatory compliance statement.

Summary of Contents for MC3000

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands