MC145192EVK
•
MC145202EVK
37
MOTOROLA
[3]! 100%
The PDout field of register C (bits C3 and C2) is set to 11 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
[2] Change PDout current (only available on ’220)
[0]! 5%
The PDout field of register C (bits C5 and C4) is set to 00 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
[1]! 50%
The PDout field of register C (bits C5 and C4) is set to 01 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
[2]! 80%
The PDout field of register C (bits C5 and C4) is set to 10 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
[3]! 100%
The PDout field of register C (bits C5 and C4) is set to 11 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
[3] Change phase detector select (not available on ’220)
This command displays a submenu (screen #11) with the following options. It gives the user the
ability to select which phase detector is selected.
[0]! phi R & phi V
Bit C6 of register C is reset to 0 while the remaining bits are preserved and the C register is
written to the targeted board.
[1]! PDout
Bit C6 of register C is set to 1 while the remaining bits are preserved and the C register is
written to the targeted board.
[3] Change phase detector (only available on ’220)
This command displays a submenu (screen #11) with the following options. It gives the user the
ability to select which phase detector is selected.
[0]! phi R & phi V
Bit C2 of register C is set to 1 while the remaining bits are preserved and the C register is
written to the targeted board.
[1]! PDout
Bit C2 of register C is reset to 0 while the remaining bits are preserved and the C register is
written to the targeted board.
