10
Getting Started
3.
Gently tighten the screw in a clockwise direction using a small cross head
or flat end screwdriver.
2.3
Parent Unit Power Supply
IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is
recommended. This will allow the unit to operate on battery in the event of a
power failure.
1.
Connect the small plug of the power adapter to the Parent Unit and the
other end to the electrical outlet. Only use the supplied power adapter (5V
DC / 600mA) with the Micro USB plug.
2.
Press and hold the
P
POWER ON/OFF button for 1 second to switch
ON the Parent Unit.
3.
Once the Camera and Parent Units are switched on, the display on the
Parent Unit will show the video captured by the Camera Unit.
4.
If there is no connection or you are out of range, the video display will be
replaced by a
symbol and the unit will beep every 5 seconds. Move the
Parent Unit closer to the Camera Unit until the link is re-established.
Small cross head or flat
end screwdriver
Micro USB Plug
Micro USB Socket
