![background image](http://html.mh-extra.com/html/motorola/mbp30/mbp30_user-manual_241527010.webp)
10
Getting started
2.4
Registration
The baby monitor is already pre-registered upon your purchase. You do
not need to re-register it again unless the baby unit loses its link with the
parent unit. Please check that you have selected the correct channel that
was linked to your baby unit before you attempt to re-register your unit.
To re-register your baby monitor, follow the procedure below:
1.
Switch off the camera and remove the small power plug from the
camera. Then, remove the battery pack from the parent unit and
switch off the mains power.
2.
When the battery pack is replaced in the Parent unit with the
mains power switched back on, the LCD screen illuminates and
starts up automatically.
3.
Press
D
to enter menu mode.
4.
Press
(
or
)
until
is selected on the LCD screen.
5.
Press
+
or
-
to select the camera channel you wish to pair.
There are up to 4 camera channels available for pairing.
6.
Switch on the camera and press
F
on the Parent unit to start
pairing.
Pairing
is displayed as the Parent unit search for a camera
device.
Wait for 16 seconds for the parent unit to locate the camera and map it
to the current selected channel. The pairing is complete when the
display screen on the parent unit captures the video from the baby
unit’s camera.
If no camera is found,
No Device found
will be displayed on the LCD
screen. Switch the camera off and on to try again.
Summary of Contents for MBP30
Page 26: ......