Advanced Features
USER’S GUIDE
5
m
470
Advanced Features
ADVANCED FEATURES (
m
470)
The m470 is provided with an advanced feature set as described
in this section. Additionally, the m470 has 9.6/4.8 kbs data func-
tionality and can initiate and receive data calls. For a complete
description of these functions please refer to the Circuit Data
User’s Guide (publication number 68P81084C18).
MULTI-SIMULTANEOUS TALKGROUP SCAN
Multi-Simultaneous Talkgroup Scan (Scan) allows users within a
fleet to monitor more than one talkgroup. A Talkgroup Mode,
with ID’s in the range of 1-255, is comprised of up to four talk-
groups (one Primary Talkgroup and up to three Secondary Talk-
groups). Calls can only be initiated on the user’s Primary
Talkgroup, however, a user can respond to an active call on either
a Primary or Secondary Talkgroup. Both Primary and Secondary
Talkgroups can be named (aliased); however, Talkgroup Modes
cannot be aliased. The default setting of the Scan feature is
“ON”, but the user has the capability of disabling Scan through
an option key. The unit will store the last Scan setting, and power
on with that setting.
Entering Group Mode
Press the
key to power on your unit. Press
to enter the
Group Mode.
Two different Talkgroup Modes are displayed below. The dis-
play on the left shows a non-aliased Primary Talkgroup, and the
display on the right shows an aliased Primary Talkgroup. On the
second line of the display, the talkgroup mode ID will be shown,
followed by a colon, then followed by the Primary Talkgroup.
Primary Talkgroup Primary Talkgroup
Not Aliased Aliased
PWR
PWR
GROUP
82C89-O_AdvancedFeaturesText Page 5 Friday, January 3, 1997 9:06 AM
