SYMBOL LS2208
http://www.motorola.com/ls2208
MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered
in the U.S. Patent and Trademark Office. All other product or service names are the
property of their respective owners. © Motorola, Inc. 2010
72-71882-01 Revision D March 2010
© MOTOROLA, INC. 2010
All rights reserved.
Motorola reserves the right to make changes to any product to improve reliability, function, or design.
Motorola does not assume any product liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein. No license is granted, either expressly or by implication,
estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system,
apparatus, machine, material, method, or process in which Motorola products might be used. An implied license
exists only for equipment, circuits, and subsystems contained in Motorola products.
Laser Labels
In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user:
ENGLISH
HEBREW
CLASS 1
CLASS 1 LASER PRODUCT
CLASS 2 LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
DANISH / DANSK
ITALIAN / ITALIANO
KLASSE 1 KLASSE 1 LASERPRODUKT
CLASSE 1
PRODOTTO AL LASER DI CLASSE 1
KLASSE 2 LASERLYF
CLASSE 2
LUCE LASER
SE IKKE IND I STRÅLEN
NON FISSARE IL RAGGIOPRODOTTO
KLASSE 2 LASERPRODUKT
AL LASER DI CLASSE 2
DUTCH / NEDERLANDS
NORWEGIAN / NORSK
KLASSE 1 KLASSE-1 LASERPRODUKT
KLASSE 1
LASERPRODUKT, KLASSE 1
KLASSE 2 LASERLICHT
KLASSE 2
LASERLYS IKKE STIRR INN ILYSSTRÅLEN
NIET IN STRAAL STAREN
LASERPRODUKT, KLASSE 2
KLASSE-2 LASERPRODUKT
FINNISH / SUOMI
PORTUGUESE / PORTUGUÊS
LUOKKA 1 LUOKKA 1 LASERTUOTE
CLASSE 1
PRODUTO LASER DA CLASSE 1
LUOKKA 2 LASERVALO
CLASSE 2
LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO
ÄLÄ TUIJOTA SÄDETTÄ
PRODUTO LASER DA CLASSE 2
LUOKKA 2 LASERTUOTE
FRENCH / FRANÇAIS
SPANISH / ESPAÑOL
CLASSE 1 PRODUIT LASER DE CLASSE 1
CLASE 1
PRODUCTO LASER DE LA CLASE 1
CLASSE 2 LUMIERE LASER
CLASE 2
LUZ LASER
NE PAS REGARDER LE RAYON FIXEMENT
NO MIRE FIJAMENTE EL HAZ
PRODUIT LASER DE CLASSE 2
PRODUCTO LASER DE LA CLASE 2
GERMAN / DEUTSCH
SWEDISH / SVENSKA
KLASSE 1 LASERPRODUKT DER KLASSE 1
KLASS 1
LASERPRODUKT KLASS 1
KLASSE 2 LASERSTRAHLEN
KLASS 2
LASERLJUS STIRRA INTE MOT STRÅLEN
NICHT DIREKT IN DEN LASERSTRAHL
LASERPRODUKT KLASS 2
SCHAUEN
LASERPRODUKT DER KLASSE 2
Motorola, Inc. One Motorola Plaza , Holtsville, New York 11742-1300, USA
http://www.motorola.com/enterprisemobility
Warranty
For the complete Motorola hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty
Service Information
If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a
problem with the equipment, they will contact the Motorola Enterprise Mobility Support at:
http://www.motorola.com/enterprisemobility/contactsupport
For the latest version of this guide go to: http://www.motorola.com/enterprisemobility/manuals
Power Supply
Note: Use only a Symbol-approved power supply (p/n 50-14000-253R, 50-14000-256R, 50-14000-257R,
50-14000-258R or 50-14000-259R) output rated 5 VDVC and minimum 650mA. The power supply is certified to
EN60950 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device
and may be dangerous. Hinweis: Benutzen Sie nur eine von Symbol Technologies genehmigte
Stromversorgung mit einer Ausgangsleistung von 5 VDC (Gleichstrom) und mindestens 650mA. Die
Stromversorgung ist nach EN60950 für die Verwendung in SELV-Stromkreisen zertifiziert. Bei Verwendung
eines anderen Netzteils werden alle für das Gerät gewährten Genehmigungen außer Kraft gesetzt, und der
Betrieb kann gefährlich sein
0 1 2 3 4 5
0 1 2 3 4 5
AVOID EXTREME
WRIST ANGLES
AVOID BENDING
AVOID REACHING
Avoid Extreme Wrist Angles
Avoid Reaching
Avoid Bending
Ergonomic Recommendations
Caution:
In order to avoid or minimize the potential risk of
ergonomic injury follow the recommendations below.
Consult with your local Health & Safety Manager to
ensure that you are adhering to your company's safety
programs to prevent employee injury.
•
Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
POST IN WORK AREAPOST IN WORK AREA
Tested to comply
with FCC Standards
FOR HOME OR OFFICE USE
Radio Frequency Interference Requirements
Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. However there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• R
eorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Regulatory Information
Symbol Technologies, Inc., the Enterprise Mobility business of Motorola, Inc. ("Motorola").
All Symbol devices are designed to be compliant with rules and regulations in locations they are sold
and will be labeled as required.
Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol
Technologies, could void the user's authority to operate the equipment.
Antenna’s, use only the supplied or an approved replacement antenna. Unauthorized antennas,
modifications, or attachments could cause damage and may violate regulations.
Laser Devices
Symbol products using lasers complies with 21CFR1040.10 and 1040.11 except for
deviations pursuant to laser notice No. 50, dated June 24, 2007 and IEC 60825-1
(Ed. 2.0), EN60825-1:2007. The laser classification is marked on one of the labels on the
product. Class 1 Laser devices are not considered to be hazardous when used for their
intended purpose.
The following statement is required to comply with US and international regulations:
Caution:
Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as
the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser
is not known to be harmful.
TROUBLESHOOTING
SCANNER INDICATIONS
LED Indications
Off
Scanner is on and ready to scan,
or no power to scanner
Green
Bar code is
successfully decoded
Red
Transmission error
Low/High beep
Incorrect programming sequence
or ’Cancel’ bar code scanned
High/low beep
Power up
Bar code decoded
Transmission error detected,
data is ignored
High/low/high/low beep
Successful
parameter setting
Correct programming
sequence performed
Parameter Menu Scanning
Low/medium/high beep
Short medium beep
4 long low beeps
Standard Use
Beeper Indications
No power to scanner
Check system power;
ensure power supply,
if required, is connected
Incorrect interface cable used
Interface/power cables are loose
Ensure that correct
interface cable is used
Ensure all cable connections
are secure
Scanner not working
Scanner not programmed for correct host interface
Scan appropriate host parameter bar codes
Scanned data incorrectly displayed on host
Scanner not decoding bar code
Bar code unreadable
Ensure bar code not defaced;
try scanning test bar code
of same bar code type
Distance between scanner
and bar code incorrect
Move scanner closer to or
further from bar code
Scanner not programmed
for bar code type
Ensure scanner is programmed
to read type of bar code being
scanned
Troubleshooting
Scanner decoding bar code, but data not transmitting to host
Scanner not programmed for correct host interface
Scan appropriate host parameter bar codes
Interface cable is loose
Ensure all cable connections
are secure
RECOMMENDED USAGE GUIDE - OPTIMUM BODY POSTURE
OPTIMUM
SCANNING
HANDS FREE STAND
SET DEFAULTS
Return to Factory Defaults
SET DEFAULTS
Radio Frequency Interference Requirements – Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Marking and European Economic Area (EEA)
Statement of Compliance
Symbol Technologies, Inc., hereby declares that this device is in compliance with all the applicable Directives,
89/336/EEC, 73/23/EEC. A Declaration of Conformity may be obtained from
http://www.motorola.com/enterprisemobility/doc
Japan (VCCI) - Voluntary Control Council for Interference
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may
cause radio interference. Install and use the equipment according to the instruction manual.
この装置は、情報処理装置等電波障害自主規制協議会（ＶＣＣＩ）の基準に基づくクラス
B
情
報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この装置がラ
ジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。
取扱説明書に従って正しい取り扱いをして下さい。
REGULATORY INFORMATION
123SCAN
2
123Scan
2
is an easy-to-use, PC-based software
tool that enables rapid and easy customized
setup via a bar code or USB cable. For more
information, visit:
http://www.motorola.com/123Scan
2
.
