Motorola LEX L10i, User Manual

Page: 148 / 186

6 Tap the desired network.
If the network security is Open, the device automatically connects to the network. For all other
network security a dialog box appears.
Figure 81: WLAN Network Security Dialog Boxes
NOTICE: By default, the network Proxy is set to None and the IP settings is set to
DHCP.
7 If the network security is WEP or WPA/WPA2 PSK, enter the required password and then tap
Connect.
8 If the network security is 802.1x EAP, enter the information below and then tap Connect:
• Tap the EAP method drop-down list and select PEAP, TLS, or TTLS.
• Tap the Phase 2 authentication drop-down list and select an authentication method.
• If required, tap CA certificate and select a Certification Authority (CA) certificate. Note:
Certificates are installed using the Security settings.
• If required, tap User certificate and select a user certificate. Note: User certificates are
installed using the Location & security settings.
• If required, in the Identity text box, enter the username credentials.
• If desired, in the Anonymous identity text box, enter an anonymous identity username.
• If required, in the Password text box, enter the password.
9 Tap .
Return to Process
Wireless Local Area Networks on page 145
9.2.3
Adding a Wi-Fi Network
When and where to use: You can add a Wi-Fi Network that is currently out of range or indiscoverable.
Procedure:
1 Tap .
MN002347A01-B
Chapter 9: Wireless
148 Send Feedback