2.9.1
Selecting a Locking Option
When and where to use: Security dictates a specific level of locking for the LEX L10g. Use this
procedure to select a locking option.
Procedure:
1 Tap
.
2 Tap
.
3 Tap Security.
4 Tap Screen lock.
The following options are displayed:
•
None.
•
Slide — User slides the lock to unlock the device.
•
Face Unlock — User must enter a snapshot of their face to unlock the device.
•
Pattern — User must replicate a specified pattern to unlock the device.
•
PIN — User must enter a pin to unlock the device.
•
Password — User must enter a specified password to unlock the device.
5 Select an option.
If None or Slide is selected, the Security screen is re-displayed. If Face Unlock, Pattern, PIN,
or Password is selected, a face, pattern, pin, or password must be specified. Then, the
Security screen is re-displayed.
The device is set to lock.
Postrequisites: Specify a face as described in
Specifying a Face Unlock on page 47
Specifying a Pattern on page 48
. Specify a pin, or password as described in
Specifying a PIN or Password on page 48
. Then, specify a timeout value as described in
Timeout for Locking on page 49
2.9.1.1
Specifying a Face Unlock
Prerequisites: The Face Unlock option must be selected for Screen lock.
When and where to use:
Use this procedure to specify a face to unlock your LEX L10g:
Procedure:
1 Tap
.
2 Tap
.
3 Tap Security.
4 Tap Security lock.
5 Select Face Unlock.
6 Tap Set it up.
MN002858A01-A
Chapter 2: Getting Started
47
Summary of Contents for LEX L10g
