Motorola L512CBT, User Manual

Page: 49 / 61

Using the phone 49
4.26.8 Deleting all old messages
1. Press MENU and then VOL+ or REDIAL/VOL- to
select
ANSWER MACHINE
.
2. Press MENU and then VOL+ or REDIAL/VOL-
select
DEL ALL OLD MSG
.
3. Press MENU to confirm.
NOTE
When the answering machine is full, will flash if
there are new messages.
ERASE SOME ANSWERER MSG
will
toggle within 2 seconds with
MEMORY FULL
in idle to alert
user to delete some answering machine messages to
free up the memory.
4.26.9 Remote access
Remote access allows you to operate your answering
machine and listen to your messages by calling your
phone from another phone.
Turn the remote access on/off
1. Press MENU and then VOL+ or REDIAL/VOL- to
select
ANSWER MACHINE
.
2. Press MENU and then VOL+ or REDIAL/VOL- to
select
REMOTE ACCESS
.
3. Press MENU and then VOL+ or REDIAL/VOL- to
select
ON
or
OFF
.
4. Press MENU to confirm.
To enter the remote access mode, dial your phone
number from another phone, when you hear the
announcement, press TONE/* and then enter the 4-digit
remote security code (default code is 0000) on your
another telephone.
The correct sequence of the 4 security PIN digits needs
to be detected before entering remote access mode.
Random digits detected prior to the correct 4 digits
sequence are ignored, and answering machine recording
continues until the complete PIN is detected. There is no
system prompt to enter the remote access code.
Press the following keys on your another phone to
perform the following functions, after entering your
remote access mode.
Press... To...
1 Press once to replay the current message
from the beginning. Press twice to play
the previous message.
2 Play/Stop the message
3 Skip forward to the next message
4 Toggle Answer Off/Announce Only/
Announce and Record modes
7 Listen to the Main Menu (for Full Voice
prompts only)
0 Delete the message