manualshive.com logo in svg

Motorola L2, Service Manual

Share
Download
Motorola L2 Service Manual Download Page 27

6809495A75-O

          October 14, 2005   

27

Level 1 and 2 Service Manual

Disassembly

Removing and Replacing the Camera Assembly

.

1.

Remove the battery cover, battery, SIM, antenna, and transceiver PC board as 
described in the procedures..

2.

Use the disassembly tool to unseat the camera assembly flex connector from 
the transceiver PC board assembly (see Figure 16).

3.

Lift the camera assembly away from the transceiver PC board.

4.

To replace, align the camera grommet to the transceiver PC board

5.

Align the camera assembly to the transceiver PC board.

6.

Carefully press the camera flex connector into its socket on the transceiver PC 
board.

7.

Reassemble the transceiver PC board, antenna, SIM, battery and battery cover 
as described in the procedures.

G

This product contains static-sensitive devices. Use anti-static handling procedures 
to prevent ESD and component damage.

G

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when 
handling.

050784o

Figure 16. Removing the Camera Assembly

Disassembly tool

Camera Flex 
Connector

Summary of Contents for L2























































Reviews:

No comments

Brands by name

Popular brands

Load more brands