Motorola L2, Service Manual

Page: 16 / 54

16 October 14, 2005 6809495A75-O
Tools and Test Equipment L6
Tools and Test Equipment
Table 1 lists the tools and test equipment used on L6 telephones. Use either the
listed items or equivalents.
Table 1. General Test Equipment and Tools
Motorola
Part Number
1
Description Application
See Table 6. Charger Used to charge battery and power phone.
0180386A82
Antistatic Mat Kit (includes 66-80387A95 antistatic
mat, 66-80334B36 ground cord, and 42-80385A59
wrist band)
Provides protection from damage to phone caused
by electrostatic discharge (ESD).
6680388B67 Disassembly Tool, plastic with flat and pointed
ends (manual opening tool)
Used during assembly/disassembly.
6680388B01 Tweezers, plastic Used during assembly/disassembly.
RSX4043-A Torque Driver Used to remove and replace screws.
— Torque Driver Bit T-5 Plus Used with torque driver.
HP34401A
2
Digital Multimeter Used to measure battery voltage.
W.FL2-LP-N Coaxial cable connector extraction tool
Used to remove cable connector from circuit
board.
W.FL-LP-IN Coaxial cable connector insertion tool Used to attach cable connector to circuit board.
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) by phone at (800) 422-4210 or
FAX (800) 622-6210; Internationally, you can reach AAD by phone at (847) 538-8023 FAX (847) 576-3023.
2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.
1 and 2
6809495A75-O
L6