Motorola IT.6T Series User Manual Download Page 46

Page: 46 / 72

Room monitor

2. The phonebook is displayed, either scroll to the entry you want to use or search

alphabetically and press

3. Scroll to the number you want to set and press

4. Press

to return to standby.

NOTE

When Room Monitor is switched on and the sound level reaches a certain level the

receiver unit will be automatically dialled.
If the Room Monitor is triggered to call a handset or number and the called handset is on a

call, an alert tone of 2 beeps will be heard.

11.3 Change the monitor level

The monitor level can be set to High, Medium or Low, the default setting is “Low”.
To increase the sensitivity of the Room Monitor:
1. Press

Menu

, scroll to

Room Monitor

and press

2. Scroll to

Level

, press

3. Scroll to select

Low,

Medium

High

and press

4. Press

to return to standby.

IMPORTANT

This product is not intended for use as a baby safety device and is not a substitute for

adult supervision.

Summary of Contents for IT.6T Series









































































Search results

Summary of Contents for IT.6T Series

Reviews:

Related manuals for IT.6T Series

Brands by name

Popular brands

Motorola IT.6T Series, User Manual

Search results

Summary of Contents for IT.6T Series

Reviews:

Related manuals for IT.6T Series

Brands by name

Popular brands