Motorola IT.6T Series User Manual Download Page 12

Page: 12 / 72

Getting started

Date and time

If you have subscribed to a Caller ID Service, the date and time is set automatically for all

handsets when you receive your first call.
If you do not have a Caller ID service, you can set the date and

time manually.
1. Press

Menu

, scroll to

Date & Time

and press

Enter Date

is highlighted. Press

3. Enter the date using the format DD-MM-YYYY e.g. 04-08-2015 for 4 August 2015 and

press

4. Scroll down to

Enter Time

and press

5. Enter the time (hh:mm) and press

If the current time format setting is 12 hour, press

to select

6. Press

to return to standby.

NOTE

The date and time is retained during a power failure or when the battery is discharged.
You can also set the time and date format, see page 61.

Your IT.6T is now ready for use.

Summary of Contents for IT.6T Series









































































Search results

Summary of Contents for IT.6T Series

Reviews:

Related manuals for IT.6T Series

Brands by name

Popular brands

Motorola IT.6T Series, User Manual

Search results

Summary of Contents for IT.6T Series

Reviews:

Related manuals for IT.6T Series

Brands by name

Popular brands