33
Creating Entries
2
Select
Filter
.
3
Set this option to
Show Prvt/Grp
.
To set Contacts to show all entries:
1
From the Contacts list, press
m
.
2
Select
Filter
.
3
Set this option to
Show All
.
Creating Entries
A number or address and a Contacts type are
required for all Contacts entries. Other information
is optional. You may enter the information in any
order by scrolling through the entry details.
After you have entered the number or address,
Contacts type, and any other information you want,
you can press
A
under
Done
to save the entry to
Contacts.
To cancel a Contacts entry at any time press,
e
to
return to the idle screen.
To create a Contacts entry:
1
To access the entry details screen:
Select
Contacts > [New Contact]
.
-or-
From the Contacts list, press
m
. Select
New
Contact
.
2
If you want to assign a name to the entry:
Select
Name
.
Enter the name. When you are finished,
press
O
.
Tip:
Press
A
under
Browse
to select a name
already in Contacts.
3
If you want to assign a ring tone to the name:
Select
Ringer
.
Select the ring tone you want to assign.
4
To assign a Contacts type to the number or
address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
Note:
For information about creating SDG lists,
see “Creating SDG Lists in Contacts” on
page 49.
5
To store a number or address:
Select the
#
field (or
ID
for an email address, or
IP
for an IP address).
Enter the number or address. For phone
numbers, use the 10-digit format. For email
addresses, see “Entering Text” on page 58.
Tip:
Press
A
under
Browse
to select a
number or address from Contacts, the
recent calls list, or Memo.
