Motorola i95cl, User Manual

Page: 57 / 208

49
Plus Dialing
To create a three-second pause, follow the steps below:
You can enter up to 20 characters in a single entry, stored or dialed.
NOTE: You can program your phone to pause for more than 3 seconds.
Performing the above step twice will program two pauses and
cause your phone to wait 6 seconds before entering the next set
of numbers.
Plus Dialing
NOTE: This feature may not be offered by your service provider.
This feature enables you to place an international call from most countries —
without entering the local international access code. Use Plus Dialing for all
Phonebook entries if you plan to travel outside the United States. Begin by
following the instructions for “Adding Phonebook Entries” on page 42. Before
you type the phone number to be stored:
Press and hold
*
for two seconds. The pause symbol (P) will appear
on the display screen.
1 Press and hold
0
for two seconds. A “0” appears, then changes to a
“+”.
NOTE: The network translates the “+” into the appropriate
international access code needed to place the call.
2
Enter the country code, city code, or area code, and phone number.
3 Follow the rest of the instructions for “Adding Phonebook Entries” on
page 42.