Motorola HT1550 XLS User Manual Download Page 30

Page: 30 / 96

English

GETTING ST

TED

RECEIVING A TRUNKED OR
CONVENTIONAL CALL

Press and hold the

PTT

button.

–or–

Press and release the

PTT

button and wait 3

seconds.

•

If access to the trunked system was
successful, the LED indicator lights steady
red.

In addition, your dealer can program
your radio to sound a short, high-
pitched (talk permit) tone, indicating
successful trunked system access.

•

If access to the trunked system was
unsuccessful, the LED indicator flashes
red and a low-pitched (talk prohibit) tone
sounds, indicating that the system was
busy or out-of-range.

With the

PTT

button depressed, speak clearly

into the microphone.

Release the

PTT

button to listen.

Turn your radio on.

Adjust your radio’s volume (see page 25).

Select the desired trunked or conventional
zone (see page 25 ”Selecting a Zone”).

•

Make sure the

PTT

button is released.

Listen for voice activity. The LED indicator
flashes red when your radio is receiving.

03_GettingStarted.fm Page 28 Wednesday, August 3, 2005 3:23 PM

Summary of Contents for HT1550 XLS

































































































Search results

Summary of Contents for HT1550 XLS

Reviews:

Related manuals for HT1550 XLS

Brands by name

Popular brands

Motorola HT1550 XLS, User Manual

Search results

Summary of Contents for HT1550 XLS

Reviews:

Related manuals for HT1550 XLS

Brands by name

Popular brands