63
English
SCAN
Note:
This feature is automatically enabled in
your radio and not through the radio
menu or through a preprogrammed scan
button.
PASSPORT GROUP SCAN
G
(PASSPORT TRUNKED OPERATION ONLY)
PassPort Group Scan scans talkgroups within
the selected PassPort Trunked zone, as
programmed by your dealer. Up to 16 different
talkgroups can be programmed into each Scan
list, with one Scan list assigned to each position
on the
Zone Selector
knob. You can edit these
Scan lists through your radio’s menu (see page
67).
When PassPort Group Scan is enabled:
• The
G
symbol appears on the display.
• The LED indicator blinks green during
PassPort Group Scan operation; it stops
blinking when your radio switches to an
active talkgroup or channel.
Note:
PassPort Group Scan is not available
when registered on an affiliated (non-
home) site.
If you switch to another PassPort zone,
LTR, or Conventional zone while your
radio is scanning, scanning resumes
upon return to the PassPort zone where
PassPort Group Scan was enabled.
If your radio is turned off while scanning,
the radio resumes scanning when you
turn it back on. If your radio registers on
a non-home site, scanning is not
enabled until your radio registers at its
home site.
To start PassPort Group Scan operation:
Press the preprogrammed
Scan
button (see
page 18).
To stop PassPort Group Scan operation:
Press the preprogrammed
Scan
button again.
To start or stop PassPort Group Scan
operation through the menu
:
1
)
to enter Menu mode.
6881088C42_EN.book Page 63 Thursday, May 6, 2010 7:49 PM
