29
English
GETT
ING
S
T
ART
E
D
Attaching the Side Connector Cover
TURNING YOUR RADIO ON OR OFF
1
Place the loop (attached to the side connector
cover) over the antenna; then slide it
downward until it touches the top of the radio.
2
Insert the tab on the top of the cover into the
slot above the connector.
3
Position the cover over the connector and
align the thumbscrew with the threaded hole
in the radio.
4
Tighten the thumbscrew to hold the cover in
place.
Do not overtighten the thumbscrew
.
Thumbscrew
Slot
Loop
Antenna
Turn the
On/Off/
Volume
knob clockwise.
If power-up is
successful, you hear a
Self-Test Pass Tone
and see the LED
momentarily turn green.
If your radio fails to
power up, you hear a
Self-Test Fail Tone
.
Turn the
On/Off/
Volume
knob
counterclockwise
until you hear a click.
ON
OFF
6881088C42_EN.book Page 29 Thursday, May 6, 2010 7:49 PM